Metal roofing has gone from barns to some of the nicest homes in Madison County, and for good reason: a 24-gauge standing-seam roof carries a Class 4 impact rating, a 140 mph wind rating, and a realistic 50-year life in our climate. It also reflects summer heat, which matters in August, and it's the roof most Alabama insurers like best.
The catch is that metal is unforgiving of sloppy installation. Panels expand and contract; if the clips and fasteners aren't right, seams open and fasteners back out. We install standing seam with concealed clips on a solid deck with high-temperature underlayment, and exposed-fastener panels with the right screws in the right pattern — and we'll tell you honestly which system fits your house and budget.
What's included
Standing seam
Concealed-fastener panels in 24 or 26 gauge, snap-lock or mechanically seamed, Kynar-finished colors.
Exposed fastener
5V, R-panel and ribbed panels for outbuildings, porches, barns and budget-minded homes.
Metal over shingles
Where code and the deck allow, metal can go over one existing layer with purlins or synthetic underlayment.
Trim & flashing
Ridge, hip, eave, rake, sidewall and chimney trims made for the panel profile, not improvised.
Ventilation
Vented ridge and intake so the attic breathes under a metal roof.
Metal roof repair
Fastener replacement, seam resealing and panel swaps on existing metal roofs.
Metal roofing cost in Huntsville, AL
| Job | Typical installed price | Notes |
|---|---|---|
| Exposed-fastener panels, per square | $650 – $900 | Barns, porches, outbuildings, budget homes |
| Standing seam (26 ga), per square | $1,000 – $1,400 | Snap-lock, Kynar finish |
| Standing seam (24 ga, mechanical seam), per square | $1,300 – $1,700 | Low-slope and premium homes |
| Typical 2,000 sq ft home, standing seam | $26,000 – $38,000 | Versus $11,000 – $16,000 in shingles |
| Metal roof repair | $400 – $1,500 | Fasteners, seams, panel swaps |
These are 2026 North Alabama ranges so you can budget. Your written estimate is itemized — tear-off, decking, underlayment, shingles, flashing, ventilation, disposal — and good for 30 days.
Recent work
Questions we get about metal roofing
Is a metal roof worth it in Alabama?
If you plan to stay in the house ten years or more, usually yes: it's the last roof you'll buy, it handles hail and wind better than shingles, and it lowers cooling bills. If you're selling in three years, architectural shingles are the better use of money.
Standing seam vs exposed fastener — what's the difference?
Standing seam hides the fasteners under the seam, so there are no screws with rubber washers to age and leak; it costs about twice as much. Exposed-fastener panels are screwed through the face and the washers need checking every 10–15 years; they're fine for outbuildings and porches and a fair budget choice for homes.
Is a metal roof loud in the rain?
Over a solid deck with underlayment and an insulated attic — which is how we install it on a house — it's no louder than shingles. The tin-roof-on-a-barn sound comes from open purlins with nothing underneath.
Does hail dent a metal roof?
Large hail can leave cosmetic dents in lighter-gauge panels, which is why we recommend 24 gauge in Madison County. Dents don't cause leaks on a standing-seam roof, and most carriers still rate metal as the best hail performer.
Can you put metal over my existing shingles?
Often, over one layer with the right underlayment or purlins, which saves the tear-off cost. We inspect the deck first — metal over rotten decking is a mistake nobody can see until it fails.